View AZ108607_959622.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR General Description
The AZ1086 is a series of low dropout positive voltage regulators with a maximum dropout of 1.5V at 1.5A of load current. The series features on-chip thermal shutdown. It also includes a bandgap reference and a current limiting circuit. The AZ1086 is available in 1.5V, 1.8V, 2.5V, 3.0V, 3.3V, and 5.0V versions. The fixed versions integrate the adjust resistors. It is also available in an adjustable version, which can set the output voltage with only two external resistors. The AZ1086 series is available in standard packages of TO-263-3, TO-220-3, SOT-223 and TO-252-2 (1).
AZ1086
Features
* * * * * * * Low Dropout Voltage: Typical 1.3V at 1.5A Current Limiting and Thermal Protection Output Current: 1.5A Current Limit: 2.3A Operating Junction Temperature: 0 to 125oC Line Regulation: 0.015% (Typical) Load Regulation: 0.1% (Typical)
Applications
* * * * * * * * * High Efficiency Linear Regulators Battery Charger Post Regulation for Switching Supply Microprocessor Supply Motherboard Power Supply Cable and ADSL Modem DVD-Video Player Telecom Equipment Set Top Boxes and Web Boxes Modules' Supply
TO-263-3
TO-220-3
SOT-223
TO-252-2 (1)
Figure 1. Package Types of AZ1086
Mar. 2007 Rev. 1. 4 1
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Pin Configuration
T Package (TO-220-3) S Package (TO-263-3)
3 2 1 INPUT OUTPUT ADJ/GND
AZ1086
3 2 1
INPUT OUTPUT ADJ/GND
D Package (TO-252-2(1))
H Package (SOT-223)
3 2 1 INPUT OUTPUT ADJ/GND
3 2 1
INPUT OUTPUT ADJ/GND
Figure 2. Pin Configuration of AZ1086 (Top View)
Functional Block Diagram
3
INPUT
Thermal Protection
+
2
OUTPUT
A1
A2
For Adjustable Output, disconnect A1 and A2, connect B For Fixed Output, connect A1 and A2, disconnect B
1
B
ADJ/ GND
Figure 3. Functional Block Diagram of AZ1086 Mar. 2007 Rev. 1. 4 2 BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Ordering Information
AZ1086 E1: Lead Free
AZ1086
Circuit Type
Blank: Tin Lead
TR: Tape and Reel
Blank: Tube Package D: TO-252-2 (1) T: TO-220-3 S: TO-263-3 H: SOT-223 ADJ: Adjustable Output 1.5: Fixed Output 1.5V 1.8: Fixed Output 1.8V 2.5: Fixed Output 2.5V 3.0: Fixed Output 3.0V 3.3: Fixed Output 3.3V 5.0: Fixed Output 5.0V
Package
Temperature Range
Part Number Tin Lead AZ1086D-ADJ AZ1086D-ADJTR AZ1086D-1.5 AZ1086D-1.5TR AZ1086D-1.8 AZ1086D-1.8TR Lead Free AZ1086D-ADJE1 AZ1086D-ADJTRE1 AZ1086D-1.5E1 AZ1086D-1.5TRE1 AZ1086D-1.8E1 AZ1086D-1.8TRE1 AZ1086D-2.5E1 AZ1086D-2.5TRE1 AZ1086D-3.0E1 AZ1086D-3.0TRE1 AZ1086D-3.3E1 AZ1086D-3.3TRE1 AZ1086D-5.0E1 AZ1086D-5.0TRE1 AZ1086T-ADJE1 AZ1086T-1.5E1 AZ1086T-1.8E1 AZ1086T-2.5E1 AZ1086T-3.0E1 AZ1086T-3.3E1 AZ1086T-5.0E1 Tin Lead
Marking ID Lead Free AZ1086D-ADJE1 AZ1086D-ADJE1 AZ1086D-1.5E1 AZ1086D-1.5E1 AZ1086D-1.8E1 AZ1086D-1.8E1 AZ1086D-2.5E1 AZ1086D-2.5E1 AZ1086D-3.0E1 AZ1086D-3.0E1 AZ1086D-3.3E1 AZ1086D-3.3E1 AZ1086D-5.0E1 AZ1086D-5.0E1 AZ1086T-ADJE1 AZ1086T-1.5E1 AZ1086T-1.8E1 AZ1086T-2.5E1 AZ1086T-3.0E1 AZ1086T-3.3E1 AZ1086T-5.0E1
Packing Type Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tube Tube Tube Tube Tube Tube
AZ1086D-ADJ AZ1086D-ADJ AZ1086D-1.5 AZ1086D-1.5 AZ1086D-1.8 AZ1086D-1.8 AZ1086D-2.5 AZ1086D-2.5 AZ1086D-3.0 AZ1086D-3.0 AZ1086D-3.3 AZ1086D-3.3 AZ1086D-5.0 AZ1086D-5.0 AZ1086T-ADJ AZ1086T-1.5 AZ1086T-1.8 AZ1086T-2.5 AZ1086T-3.0 AZ1086T-3.3 AZ1086T-5.0
TO-252-2 (1)
0 to 125oC
AZ1086D-2.5 AZ1086D-2.5TR AZ1086D-3.0 AZ1086D-3.0TR AZ1086D-3.3 AZ1086D-3.3TR AZ1086D-5.0 AZ1086D-5.0TR AZ1086T-ADJ AZ1086T-1.5 AZ1086T-1.8
TO-220-3
0 to 125 C
o
AZ1086T-2.5 AZ1086T-3.0 AZ1086T-3.3 AZ1086T-5.0
Mar. 2007 Rev. 1. 4 3
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Ordering Information (Continued)
Package Temperature Range Part Number Tin Lead AZ1086S-ADJ AZ1086S-ADJTR AZ1086S-1.5 AZ1086S-1.5TR AZ1086S-1.8 AZ1086S-1.8TR TO-263-3 0 to 125oC AZ1086S-2.5 AZ1086S-2.5TR AZ1086S-3.0 AZ1086S-3.0TR AZ1086S-3.3 AZ1086S-3.3TR AZ1086S-5.0 AZ1086S-5.0TR AZ1086H-ADJTR AZ1086H-1.5TR AZ1086H-1.8TR SOT-223 0 to 125oC AZ1086H-2.5TR AZ1086H-3.0TR AZ1086H-3.3TR AZ1086H-5.0TR Lead Free AZ1086S-ADJE1 AZ1086S-ADJTRE1 AZ1086S-1.5E1 AZ1086S-1.5TRE1 AZ1086S-1.8E1 AZ1086S-1.8TRE1 AZ1086S-2.5E1 AZ1086S-2.5TRE1 AZ1086S-3.0E1 AZ1086S-3.0TRE1 AZ1086S-3.3E1 AZ1086S-3.3TRE1 AZ1086S-5.0E1 AZ1086S-5.0TRE1 AZ1086H-ADJTRE1 AZ1086H-1.5TRE1 AZ1086H-1.8TRE1 AZ1086H-2.5TRE1 AZ1086H-3.0TRE1 AZ1086H-3.3TRE1 AZ1086H-5.0TRE1 Tin Lead AZ1086S-ADJ AZ1086S-ADJ AZ1086S-1.5 AZ1086S-1.5 AZ1086S-1.8 AZ1086S-1.8 AZ1086S-2.5 AZ1086S-2.5 AZ1086S-3.0 AZ1086S-3.0 AZ1086S-3.3 AZ1086S-3.3 AZ1086S-5.0 AZ1086S-5.0 H86A H86B H86E H86C H86G H86D H86F Marking ID Lead Free AZ1086S-ADJE1 AZ1086S-ADJE1 AZ1086S-1.5E1 AZ1086S-1.5E1 AZ1086S-1.8E1 AZ1086S-1.8E1 AZ1086S-2.5E1 AZ1086S-2.5E1 AZ1086S-3.0E1 AZ1086S-3.0E1 AZ1086S-3.3E1 AZ1086S-3.3E1 AZ1086S-5.0E1 AZ1086S-5.0E1 EH86A EH86B EH86E EH86C EH86G EH86D EH86F Packing Type Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tape & Reel Tape & Reel Tape & Reel Tape & Reel Tape & Reel Tape & Reel Tape & Reel
AZ1086
BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant.
Mar. 2007 Rev. 1. 4 4
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Absolute Maximum Ratings (Note 1)
Parameter Operating Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 10sec) Symbol TJ TSTG TLEAD TO-263-3 TO-220-3 SOT-223 ESD (Machine Model) ESD 400 Value 150 -65 to 150 260 TO-252-2 (1)
Thermal Resistance (Note 2) JA
AZ1086
Unit
o o o
C C C
100 60 60 120 V
o
C/W
Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Note 2: Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply when operating the device outside of its operating ratings. The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(max), the junction-to-ambient thermal resistance, JA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using: PD(max)=(TJ(max) -TA)/JA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.
Recommended Operating Conditions
Parameter Input Voltage Operating Junction Temperature Range Symbol VIN TJ 0 Min Max 15 125 Unit V
oC
Mar. 2007 Rev. 1. 4 5
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Electrical Characteristics
Typicals and limits appearing in normal type apply for TJ = 25oC. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0oC to 125oC. (PDmaximum power dissipation, see Note 3.)
Parameter Reference Voltage Symbol VREF Conditions AZ1086-ADJ, IOUT=10mA, VIN-VOUT=2V, TJ=25oC, 10mAIOUT1.5A, 1.4VVIN-VOUT6V AZ1086-1.5, IOUT=10mA, VIN=3.5V, TJ=25oC, 10mAIOUT1.5A, 3VVIN10V AZ1086-1.8, IOUT=10mA, VIN=3.8V, TJ=25oC, 10mAIOUT1. 5A, 3.2VVIN10V Output Voltage VOUT AZ1086-2.5, IOUT=10mA, VIN=4.5V, TJ=25oC, 10mAIOUT1.5A, 3.9VVIN10V AZ1086-3.0, IOUT=10mA, VIN=4.5V, TJ=25oC, 10mAIOUT1.5A, 4.9VVIN10V AZ1086-3.3, IOUT=10mA, VIN=5V, TJ=25oC, 10mAIOUT1.5A, 4.75VVIN10V AZ1086-5.0, IOUT=10mA, VIN=7V, TJ=25oC, 10mAIOUT1.5A, 6.5VVIN10V AZ1086-ADJ, IOUT = 10mA, 1.5V VIN-VOUT10V IOUT=10mA, 1.5VVIN-VOUT10V IOUT=10mA, 1.5VVIN-VOUT10V IOUT=10mA, 1.5VVIN-VOUT10V IOUT=10mA, 1.5V VIN-VOUT10V IOUT=10mA, 1.5VVIN-VOUT10V IOUT=10mA, 1.5VVIN-VOUT10V Min 1.238 1.225 Typ 1.250 1.250 Max 1.262 1.270 Unit
AZ1086
V
1.485 1.47
1.5 1.5
1.515 1.53
V
1.782 1.746
1.8 1.8
1.818 1.854
V
2.475 2.45
2.5 2.5
2.525 2.55
V
2.97 2.94
3.0 3.0
3.03 3.06
V
3.267 3.235
3.3 3.3
3.333 3.365
V
4.95 4.9
5 5 0.015 0.035 0.3 0.6 0.3 0.6 0.3 0.6 0.3 0.6 0.5 1 0.5 1
5.05 5.1 0.2 0.2 6 6 6 6 6 6 6 6 10 10 10 10
V % mV mV mV mV mV mV
AZ1086-1.5,
AZ1086-1.8,
Line Regulation
VOUT
AZ1086-2.5,
AZ1086-3.0,
AZ1086-3.3,
AZ1086-5.0,
Mar. 2007 Rev. 1. 4 6
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued)
Typicals and limits appearing in normal type apply for TJ=25oC. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0oC to 125oC. (PDmaximum power dissipation, see Note 3.)
Parameter Symbol AZ1086-ADJ, Conditions 10mAIOUT1.5A, VIN-VOUT=2V 10mAIOUT1.5A, VIN-VOUT=2V 10mAIOUT1.5A, VIN-VOUT=2V 10mAIOUT1.5A, VIN-VOUT=2V 10mAIOUT1.5A, VIN-VOUT=2V 10mAIOUT1.5A, VIN-VOUT=2V 10mAIOUT1.5A, VIN-VOUT=2V Min Typ 0.1 0.2 3 6 3 6 3 6 3 7 3 7 5 10 1.3 1.5 2.3 2 5 60 75 5 10 Max 0.3 0.4 12 20 12 20 12 20 15 20 15 20 20 35 1.5 Unit
AZ1086
% mV mV mV mV mV mV V A mA mA dB
AZ1086-1.5,
AZ1086-1.8,
Load Regulation
VOUT
AZ1086-2.5,
AZ1086-3.0,
AZ1086-3.3,
AZ1086-5.0,
Dropout Voltage Current Limit Minimum Load Current Quiescent Current Ripple Rejection
VDROP ILIMIT ILOAD(MIN) IQ PSRR
IOUT=1.5A, VREF=1% VIN-VOUT=2V 1.4VVIN-VOUT10V (For ADJ) VIN=VOUT+1.3V fRIPPLE=120Hz, COUT=25F Tantalum, IOUT=1.5A, VIN-VOUT=3V
Adjust Pin Current Adjust Pin Current Change Temperature Stability RMS Noise (% of VOUT) Thermal Shutdown Thermal Shutdown Hysteresis
IADJ IADJ 10mAIOUT1.5A, 1.4VVIN-VOUT10V
60 0.2
120 5
A A % %
o o
0.5 TA=25oC, 10Hzf10kHz Junction Temperature 0.003 165 30
C C
Note 3: Maximum power dissipation see Figure 5. Mar. 2007 Rev. 1. 4 7 BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Typical Performance Characteristics AZ1086
3.40
10.0
3.35
7.5
Output Voltage (V)
3.30
Power (W)
SOT-223
5.0
3.25
3.20
2.5
3.15
3.10 0 25 50 75
o
100
125
0.0 25
50
75
100
o
125
Junction Temperature ( C)
Case Temperature ( C)
Figure 4. Output Voltage vs. Junction Temperature
Figure 5. Maximum Power Dissipation
1.260 1.255
8.0 7.5 7.0 6.5
Reference Voltage (V)
Load Regulation (mV)
1.250 1.245 1.240 1.235 1.230 1.225 1.220 0 25 50 75
o
6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0
100
125
0
20
40
60
80
o
100
120
Junction Temperature ( C)
Junction Temperature( C)
Figure 6. Reference Voltage vs. Junction Temperature
Figure 7. Load Regulation vs. Junction Temperature
Mar. 2007 Rev. 1. 4 8
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Typical Performance Characteristics (Continued) AZ1086
1.3
1.15
1.2 1.1
IOUT=0.1A IOUT=0.5A IOUT=1A
VREF=1%
TA=0 C
Dropout Voltage (V)
o
1.10 1.05 1.00 0.95 0.90 0.85 0.80 -40
Dropout Voltage (V)
1.0
TA=25 C
0.9 0.8 0.7 0.6 0.5 0.1
o
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
-20
0
20
40
60
o
80
100
120
Output Current (A)
Junction Temperature ( C)
Figure 8. Dropout Voltage vs. Output Current
Figure 9. Dropout Voltage vs. Junction Temperature
2.25
66
2.00
Short Circuit Current (A)
64
Adjust Pin Current (A)
62 60 58 56 54
1.75
1.50
1.25
1.00 0 25 50 75
o
100
125
52 -40
-20
0
20
40
60
o
80
100
120
Junction Temperature ( C)
Junction Temperature ( C)
Figure 10. Short Circuit Current vs. Junction Temperature
Figure 11. Adjust Pin Current vs. Junction Temperature
Mar. 2007 Rev. 1. 4 9
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Typical Performance Characteristics (Continued) AZ1086
5
VOUT (100mV/Div)
200 100 0 -100 AZ1086-ADJ
Minimum Load Current (mA)
4
3
2
IOUT (400mA/Div)
400 0 -400 -800
Time (10s/Div)
1
0 0 25 50 75
o
100
125
Junction Temperature ( C)
Figure 12. Minimum Load Current vs. Junction Temperature
Figure 13. Load Transient Response (Conditions: VIN=4.8V, VOUT=3.3V, IOUT=0.1 to 0.75A, CIN=COUT=10F)
40
80
VOUT (20mV/Div)
20 0 -20
AZ1086-ADJ
70
Ripple Rejection (dB)
60
50
VIN (0.5V/Div)
0.5 0 -0.5 -1
Time (20s/Div)
40
30
20 10
100
1k
10k
100k
Frequency (Hz)
Figure 14. Line Transient Response (Conditions: VIN=4.8V to 5.8V, VOUT=3.3V, IOUT=0.1A, CIN=1F, COUT=10F)
Figure 15. Ripple Rejection vs. Frequency
Mar. 2007 Rev. 1. 4 10
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Typical Application AZ1086
VIN 10F
+
AZ1086-ADJ VOUT VIN ADJ R1 150
VOUT
+
22F
VOUT=VREF* (1+R2/R1) + IADJ * R2
R2 150
VIN 10F
AZ1086-5.0
+
VIN
VOUT
GND
VOUT
+
22F
Figure 16. Typical Applications of AZ1086
Mar. 2007 Rev. 1. 4 11
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Mechanical Dimensions TO-263-3 Unit: mm(inch) AZ1086
4.070(0.160) 4.820(0.190)
3
9.650(0.380) 10.290(0.405) 8.840(0.348)
70
1.270(0.050) 1.390(0.055)
1.150(0.045) 1.390(0.055) 7
7.420(0.292)
8.640(0.340) 9.650(0.380)
0.020(0.001) 0.250(0.010)
14.760(0.581) 15.740(0.620) 2.390(0.094) 2.690(0.106)
1.150(0.045) 1.390(0.055) 0.510(0.020) 0.990(0.039) 2.540(0.100) 2.540(0.100)
3
2.640(0.104) 2.700(0.106) 0.360(0.014) 0.400(0.016) 7 2.200(0.087)
5.600(0.220)
7.980(0.314)
2 8
0.380(0.015) 2.540(0.100) 0 6 2.540(0.100)
Mar. 2007 Rev. 1. 4 12
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Mechanical Dimensions (Continued) TO-220-3 Unit: mm(inch) AZ1086
9.660(0.380) 10.660(0.420) 3.560(0.140) 4.060(0.160)
2.580(0.102) 3.380(0.133)
0.550(0.022) 1.350(0.053)
1.850(0.073)
0.200(0.008)
14.230(0.560) 16.510(0.650)
7
1.500(0.059)
8.520(0.335) 9.520(0.375)
27.880(1.098) 30.280(1.192)
3.560(0.140) 4.820(0.190) 2.080(0.082) 2.880(0.113)
7
3
1.160(0.046) 1.760(0.069)
0.381(0.015)
60 0.813(0.032)
8.763(0.345)
60
0.381(0.015) 2.540(0.100) 2.540(0.100)
0.356(0.014) 0.406(0.016)
Mar. 2007 Rev. 1. 4 13
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Mechanical Dimensions (Continued) SOT-223 Unit: mm(inch) AZ1086
6.300(0.248) 6.700(0.264) 2.900(0.114) 3.100(0.122) 0.900(0.035) MIN 6.700(0.264) 7.300(0.287)
) 0.250(0.010 14) 0.350(0.0
3.300(0.130)
3.700(0.146)
0.250(0.010)
1.750(0.069) TYP 2.300(0.091) TYP 4.500(0.177) 4.700(0.185) 0.610(0.024) 0.810(0.032) 0 10
0.020(0.001) 0.100(0.004)
1.500(0.059) 1.700(0.067)
1.520(0.060) 1.800(0.071)
Mar. 2007 Rev. 1. 4 14
BCD Semiconductor Manufacturing Limited
Data Sheet 1.5A LOW DROPOUT LINEAR REGULATOR Mechanical Dimensions (Continued) TO-252-2 (1) Unit: mm(inch) AZ1086
1.350(0.053) 1.650(0.065)
6.350(0.250) 6.650(0.262) 5.200(0.205) 5.400(0.213) 0.430(0.017) 0.580(0.023)
2.200(0.087) 2.400(0.094)
4.300(0.169) 5.400(0.212)
0.600(0.024) 0.900(0.035)
9.500(0.374) 9.900(0.390)
0.000(0.000) 0.127(0.005) 5 0.700(0.028) 0.900(0.035) 0.500(0.020) 0.700(0.028) 4.500(0.177) 4.700(0.165) 5
5.400(0.213) 5.700(0.224)
1.400(0.055) 1.780(0.070)
0.430(0.017) 0.580(0.023)
Mar. 2007 Rev. 1. 4 15
BCD Semiconductor Manufacturing Limited
2.550(0.100) 2.900(0.114)
2.300TYP
3 4
3.800REF(0.150REF)
4.800(0.189) 6.500(0.256)
8
http://www.bcdsemi.com
IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifications herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or other rights nor the rights of others.
MAIN SITE BCD Semiconductor Manufacturing Limited
- Wafer Fab Shanghai SIM-BCD Semiconductor Manufacturing Limited 800, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008
BCD Semiconductor Manufacturing Limited
- IC Design Group Advanced Analog Circuits (Shanghai) Corporation 8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6495 9539, Fax: +86-21-6485 9673
REGIONAL SALES OFFICE
Shenzhen Office Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office Room E, 5F, Noble Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Tel: +86-755-8826 7951 Fax: +86-755-8826 7865 Taiwan Office BCD Semiconductor (Taiwan) Company Limited 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Taiwan Tel: +886-2-2656 2808 Fax: +886-2-2656 2806 USA Office BCD Semiconductor Corporation 30920 Huntwood Ave. Hayward, CA 94544, U.S.A Tel : +1-510-324-2988 Fax: +1-510-324-2788

▲Up To Search▲

Price & Availability of AZ108607

	To Download AZ108607 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .